MIMAKI TS300P-1800 - About MAINTENANCE MENU

Chapter 4 Maintenance
4-4
About MAINTENANCE MENU
This provides various settings for doing maintenance on the machine.
The following items can be set in Maintenance settings.
TEST PRINT
>
> CLEANING
>
STATION MAINTENANCE
MAINTENANCE
STATION
>
> NOZZLE RECOVERY
>
AUTO MAINTENANCE
>
INK FILLING
INK TANK EXCHANGE
page >< page
>
MENU
SETUP
>
> MAINTENANCE
>
MACHINE SETUP
>
NOZZLE CHECK
>
INFORMATION
MAINTENANCE
STATION
>
> NOZZLE RECOVERY
>
AUTO MAINTENANCE
>
INK FILLING
INK TANK EXCHANGE
TEST PRINT
>
> CLEANING
>
STATION MAINTENANCE
MAINTENANCE
STATION
>
> NOZZLE RECOVERY
>
AUTO MAINTENANCE
>
INK FILLING
INK TANK EXCHANGE
TEST PRINT
>
> CLEANING
>
STATION MAINTENANCE
MAINTENANCE
STATION
>
> NOZZLE RECOVERY
>
AUTO MAINTENANCE
>
INK FILLING
INK TANK EXCHANGE
MAINTENANCE
STATION
>
> NOZZLE RECOVERY
>
AUTO MAINTENANCE
>
INK FILLING
INK TANK EXCHANGE
MAINTENANCE
STATION
>
> NOZZLE RECOVERY
>
AUTO MAINTENANCE
>
INK FILLING
INK TANK EXCHANGE
width:1340mm
REMOTEMENU
TEST PRINT
CLEANING
30°/40°
width:1340mm
heigth: 4.0mm
REMOTEMENU
POST1 POST2
TEST PRINT
CLEANING
FAN
30°/40°30°/50° HIGH
Local <Setup 1> 12:00
width:1340mm
REMOTEMENU
TEST PRINT
CLEANING
30°/40°
width:1340mm
heigth: 4.0mm
REMOTEMENU
POST1 POST2
TEST PRINT
CLEANING
FAN
30°/40°30°/50° HIGH
Local <Setup 1> 12:00
width:1340mm
REMOTEMENU
TEST PRINT
CLEANING
30°/40°
width:1340mm
heigth: 4.0mm
REMOTEMENU
POST1 POST2
TEST PRINT
CLEANING
FAN
30°/40°30°/50° HIGH
Local <Setup 1> MAINTENANCE MAINTENANCE MAINTENANCE12:00
: Press this to select MAINTENANCE MENU, or to switch to
the previous screen.
: Press this to use the maintenance function.
: Press this to switch to the next screen.
: Use these to select a setting item.
: Press this to confirm a setting, etc..
 MAINTENANCE MENUs at-a-glance
 Screen transition when is pressed