MIMAKI TS300P-1800 - MACHINE SETUP MENU Table

3-14
Chapter 3 Mchine setting
MACHINE SETUP MENU table
Function name Set value Default Meaning
AUTO Power-off ( P.3-16)
NONE/
10 ~ 600min
30min
When no operation has been performed for the
set time, the power supply is automatically
turned “OFF”.
TAKE-UP UNIT
(P.3-16)
TAKE-UP UNIT ON/ OFF ON
For setting whether the take-up unit is used or
not used.
TAKE-UP
TENSION BAR
ON/ OFF OFF
For setting whether the take-up tension bar is
used or not used.
TAKE-UP SW Continuance/ Temporary
Continua
nce
Set the operation method when press ON / OFF
button on the take-up unit.
Top blower
(P.3-16)
ON AUTO/ STORONG/ WEAK AUTO
Set the operation of the top blower in print.
OFF
MEDIA REMAIN ( P.3-17) ON/ OFF OFF You can control the remaining amount of media.
HEAD HEIGHT ( P.2-4) 2.0 to 7.0 mm Set the head height.
PG DROP ADJUST ( P.3-17)
Adjust the outward and return ink drop positions
during bidirectional printing.
MEDIA DETECT
(P.3-18)
DETECTION TYPE AUTO/MANUAL AUTO Set the media detection method.
INPUT
THICKNESS
ON/ OFF ON
Set whether to enter the thickness of the media
to be used during media detection.
DRYING FEED
(P.3-18)
DRYING FEED OFF/ 100 to 1000mm OFF
Set the length of the media to feed after printing
is complete.
BACKWARD FEED ON/ OFF OFF Set if require the back-feed after feed.
LANGUAGE ( P.3-18) English Displayed language is changed.
TIME ( P.3-18) +4h ~ -20h
Japan time Time difference is corrected.
UNIT/ TEMP. ( P.3-18) °C (Centigrade)/°F (Fahrenheit) °C A unit for displaying temperature is set.
UNIT/ LENGTH ( P.3-18) mm / inch mm A unit for displaying length and area is set.
KEY BUZZER ( P.3-19) OFF / ON ON A buzzer sound when keys are pressed is set.
CONFIRM. FEED ( P.3-19) ON / OFF ON
Set whether media feeding is performed for
checking the result of the test printing etc. or not.
SPACE FEED MODE ( P.3-19)
INTERMITTENT /
CONTINUOUS
INTERMI
TTENT
Change the feed mode of the margin included in
the image data.
NETWORK
(P.3-20)
Set the network.
Check IP Addr. The IP address currently used by this machine is displayed.
Check MAC Addr. The IP address currently used by this machine is displayed.
DHCP ON / OFF
When it is ON, the IP address given by the
DHCP server is used.
AutoIP ON / OFF
When it is ON, the IP address is determined by
the AutoIP protocol. However, DHCP is ON,
DHCP has priority.
IP Address
*1
Set the IP address used by this machine.
Default Gateway
*1
Set the default gateway used by this machine.
DNS Address
*1
Set the DNS server address used by this machine.
SubNet Mask
*1
Set the digit number of the subnet mask used by this machine.