MIMAKI TS300P-1800 - Displaying the Information

Chapter 3 Confirming Machine Information
3-29
1
2
3
4
5
6
Displaying the Information
1
Press
(MENU) (4 times)
in LOCAL.
• INFORMATION MENU will be displayed.
2
Press to select a information.
• Refer to the “INFORMATION MENU”, and select the information to be displayed.
3
Press the key.
• If you selected [LIST] in step 2, the machine’s settings will be printed.
4
Press the key several times to end the setting.
• When you reset the used count of the wiper, press [FUNC2] key while [RESET?] is displayed. When you press the
[ENTER] key, the number of wipings is reset.
• By pressing the function key during display of “WIPING information,” “WASTE TANK information” and “Spout Rubber” in
USAGE, the used counts can be reset.
When resetting WIPING information : Press [FUNC2]
When resetting WASTE TANK information : Press [FUNC1]
When resetting Spout Rubber : Press [FUNC3]