MIMAKI TS300P-1800 - Cutting a Media

Chapter 2 Basic Operation
2-20
Cutting a media
By using the keys on the operation panel, you can cut the
media at any position.
1
In Local, Press .
• It enters into the origin setting mode.
• By pressing [] , feed the media to the cutting
position.
2
Press the key.
• The media is cut.
• When the cutting has been completed, the current
mode returns to LOCAL.
X
0.0
Y
0.0
POST1 POST2 FAN
SET ORIGIN
30°/40°30°/35°40°/50°