MIMAKI TS300P-1800 - Setting a KEY BUZZER; Setting the CONFIRM. FEED; Setting the SPACE FEED MODE

Chapter 3 Mchine setting
3-19
1
2
3
4
5
6
Setting a KEY BUZZER
You can turn off the buzzer sound when pressing the key.
1
Press
(MENU) (twice)
in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press
(>>)
twice.
3
Press to select “KEY BUZZER”,
and press the key.
4
Press to select a set value, and
press the key.
• Set value : ON/ OFF
5
Press the key several times to
end the setting.
Setting the CONFIRM. FEED
Set whether media feeding is performed for checking the
result of the test printing etc. or not.
1
Press
(MENU) (twice)
in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press
(>>)
twice.
3
Press to select “CONFIRM.
FEED”, and press the key .
4
Press to select a set value, and
press the key .
• Set value : ON/ OFF
5
Press the key several times to
end the setting.
Setting the SPACE FEED MODE
Change the feed mode of the margin included in the
image data (the space of no data to be printed). If print
data with much margin, set to “continuous”, then the print
time can be shorten.
1
Press the
(MENU) (twice)
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press
(>>)
twice.
3
Press to select “SPACE FEED
MODE” , and press the key.
4
Press to select a set value, and
press the key.
INTERMITTENT： Perform intermittent feed
operation of the path division unit
CONTINUOUS ：Feed the no data part at a time
5
Press the key several times to
end the setting.
• When the key buzzer is set to "OFF", the buzzer
sound for errors, warnings, operation completion,
etc. cannot be shut off.