Chapter 3 Mchine setting
3-18
Setting the Drying Feed
After printing, set the media feed length for drying
uniformly to the end of the media.
1
Press
(MENU)
(twice)
in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press
(>>)
.
3
Press to select “DRYING FEED”,
and press the key.
4
Press the key.
• “DRYING FEED” will be selected.
5
Press to input the feed length of
media, and press the key.
6
Press to select “BACKWARD
FEED”, and press the key.
7
Press to select “ON/OFF”, and
press the key.
8
Press the key several times to
end the setting.
Setting a LANGUAGE
You can change the displayed language.
1
Press
(MENU)
(twice)
in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press
(>>)
.
3
Press to select “LANGUAGE”,
and press the key .
4
Press to select language, and
press the key .
5
Press the key several times to
end the setting.
Setting Time
You can set time of your country (time difference).
1
Press
(MENU)
(twice)
in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press
(>>)
.
3
Press to select “TIME”, and
press the key.
4
Press to enter time,
and press the key.
• Year/Month/Day/Time selecting:
by the [][]
• Year/Month/Day/Time inputting:
by the [][]
5
Press the key several times to
end the setting.
Setting Unit (Temperature/ Length)
Units used by this machine are set.
1
Press
(MENU)
(twice)
in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press
(>>)
.
3
Press to select “UNIT/TEMP.” or
“UNIT/LENGTH”, and press the
key.
4
Press to select a set value, and
press the key.
• Set value of tempture :°C / °F
• Set value of length : mm / inch
5
Press the key several times to
end the setting.
• According to the position of your optional heater
unit 1800 or external heater, please configure that
the rear end of printing can pass through the
heater.
• -20 hours to +4 hours can be set.
To Next Page
Loading...
