Chapter 3 Mchine setting
3-15
1
2
3
4
5
6
EVENT MAIL
Mail Delivery
(P.3-20)
ON / OFF OFF
Set whether you send/ do not send the e-mail
when the set event occurs.
Select Event
(P.3-21)
Print Start
Event
ON / OFF OFF
Set whether you send/ do not send the e-mail at
the start of printing.
Print End Event ON / OFF OFF
Set whether you send/ do not send the e-mail at
the end of printing.
Error Event ON / OFF OFF
Set whether you send/ do not send the e-mail
when a error occurs.
Warning Event ON / OFF OFF
Set whether you send/ do not send the e-mail
when a warning occurs.
Other Event ON / OFF OFF
Set whether you send/ do not send the e-mail
when an event other than the above occurs.
Mail Address
(P.3-21)
Set the e-mail address to which
you send the event mail.
Alphanumeric characters and symbols (within 96
characters)
Message Subject
(P.3-21)
Set the characters to write in the
subject of the event mail.
Alphanumeric characters and symbols (within 8 characters)
Server Setup
(P.3-22)
SMTP Address Set the SMTP server.
SMTP Port No. Set the SMTP port number.
SENDER ADDRESS
Set the e-mail address to be used as the sender mail
address.
Authentication
POP before
SMTP
Set the SMTP server authentication method (SMTP
authentication).
SMTP
Authentication
OFF
User Name
*2
Set the user name used for the authentication.
Pass Word *2 Set the password used for the authentication.
POP3 Address
*3
Set the POP server.
APOP *3 Set ON/ OFF of APOP.
Transmit Test
(P.3-23)
Send the test e-mail.
RESET
( P.3-24)
All setting values are returned to the status
default.
*1. Settable when both of DHCP and AutoIP are [OFF]
*2. Settable only when Auth. is not OFF
*3. Settable only when Auth. is POP before SMTP
Function name Set value Default Meaning
To Next Page
Loading...
