MIMAKI TS500P-3200 - Chapter 1: Before Use

This chapter
describes the items required to understand before use, such as the name of each part of
the machine or the installation procedures.
About installing this machine ........................1-2
Where to Install This Machine ..................... 1-2
Working Environmental Temperature ......... 1-2
About fixing machine ................................... 1-2
Moving This Machine .................................. 1-2
Names of Parts and Functions ......................1-3
Front Side of the Machine ........................... 1-3
Rear Side and Right Side of the Machine ... 1-4
Operation Panel .......................................... 1-5
Heater .........................................................1-7
Media sensor ............................................... 1-7
Carriage ...................................................... 1-7
Nozzle Check Unit (NCU) ........................... 1-7
Cutter blade and slot for cutting .................. 1-8
Indicator ......................................................1-8
Capping station ........................................... 1-8
Pinch rollers and Feed rollers ..................... 1-8
Connecting Cables ........................................1-9
Connecting the LAN cable ...........................1-9
Connecting USB2.0 Interface Cable ............1-9
Connecting Power Supply Cable .................1-9
Fill ink in the ink tank and charging .............1-10
Caution in handling of ink bottles ...............1-12
Media ..........................................................1-13
Usable sizes of media ................................1-13
Caution in handling of medias ...................1-13
About emergency switch .............................1-14
The position of the emergency switch .......1-14
If you feel the danger .................................1-14
Chapter 1
Before Use