MIMAKI TS500P-3200 - Displaying the Information; Displaying the Information of this Machine

3-28
Displaying the Information
1
Press the
(MENU)
in Local.
2
Press to select “Information ”,
and press the key.
• Information menu appears.
3
Press to select a item.
• Refer to the “Information menu”, and select the
information to be displayed.
4
Press the key.
• If you selected [List] in step 2, the machine’s
settings will be printed.
5
Press the key several times to
end the setting.
Resetting wiper use count
1
“Usage” of Information menu is displayed.
(1) Press the [FUNC1] (MENU) in Local
(2) Press [][] to select “Information”, and
press the [ENTER] key twice.
2
Press to select “Wiping ” and
press the
(  )
.
• A confirmation screen appears asking if you want
to clear the use count of the wiper.
3
Press the key to clear the counter.
• The use count of the wiper is cleared.
Displaying the Information of this
machine
1
Press the key in Local.
2
The information is displayed sequentially
with the key .
• The information shown on the below appear.
3
Press the key to return to Local.
Ink information
Error/ Warning
(Only at the time of
occurrence)
Machine information
(Media width/ Serial No.
/Version)
Nozzle check result
(The number of missing
nozzles detected by
nozzle check)
Sb310
4. B 80% No Error
3. B 80% No Error
2. M 90% No Error
1. M 90% No Error
Warning
Media Undetected
!NCU CONNECT
Warning
Media width
3200mm
0.5mm
Head gap
'00000000 Serial No.
V1.00
TS500P-3200
No Connect
LAN status
Information
NozzleCheck
０
０
０
０
０
M
B
Y
K
M
Line1 M
Line1 B
Line1 Y
Line1 K
Line2 M
1/3
>><<