EasyManua.ls Logo

MIMAKI TS500P-3200 - Ink Specifications; Supply Item List

MIMAKI TS500P-3200
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 6 Appendix
6-3
6
Ink specifications
Supply item list
Recomended
Environment
Available temp. 20 °C to 30 °C (68°F to 86°F)
Humidity 35 to 65% Rh (No condensation)
Guaranteed temp. 20 °C to 25 °C (68°F to 77°F)
Temperature change ± 10 °C / h or less
Dust 0.15mg/m
3
(Equivalent to normal office level)
Highest operation
height
2000 m
Weight Printer main unit 1500 kg
Outside dimen-
sions
Printer main unit 5620 mm(W) x 1800 mm(D) x 1820 mm(H)
*1. Bold is the recommended pass.
*2. Without deflection of the roll when it is retained at both ends.
*3. The expansion and/or contraction of media is excluded.
*4. The initial meandering of the media which is just set is excluded.
*5. Only if all the following conditions are met:
The media is set in the center of the machine.
When roll holders are used, printing is started on a roll having no deflection.
The take-up device is used.
One roll media is used (except for twin rolls).
*6. “Involuted” for the media take-up direction is recommended.
*7. Directly connect the machine to a PC with a LAN cable.
Item Specifications
Supply 2L Ink bottle
Color
Black ink
Blue ink
Magenta ink
Yellow ink
Ink capacity 2 liter
Shelf life
The period is printed on the ink bottle.
Within three months after opening the package even in the available period.
Storage tempera-
ture
Storage 5 to 30˚C
Transportation
1 to 60˚C (Storage at temperature of 60˚C is only permitted within 120 hours, and
at temperature of 40˚C is permitted within a month.)
Do not disassemble the ink bottle.
Ink could freeze if kept in a cold place for an extended period.
If the ink freezes, thaw it at room temperature (25°C) spending more than three hours before use.However, when you
use the frozen ink, the printing quality becomes degraded due to altered ink. Store ink in the environment where ink may
not freeze.
Product No.
Name
SB310-BLT-BB Sublimation dye ink bottle Blue (2 liter bottle)
SB310-MT-BB Sublimation dye ink bottle Magenta (2 liter bottle)
SB310-YT-BB Sublimation dye ink bottle Yellow (2 liter bottle)
SB310-KT-BB Sublimation dye ink bottle Black (2 liter bottle)
SB310-LBT-BB Sublimation dye ink bottle Light blue (2 liter bottle)
SB310-LMT-BB Sublimation dye ink bottle Light magenta (2 liter bottle)
SPA-0189 HF filter
SPC-0527 Clean stick for the surroundings of the head 50pcs
SPA-0193 Wiper kit
SPA-0263 Cap ink absorber kit
SPA-0266 3L ink bottle
ML003-Z-K1 Cleaning Liquid 03 MAINTENANCE KIT
Item Specifications

Table of Contents

Other manuals for MIMAKI TS500P-3200

Related product manuals