2-2
Chapter 2 Basic Operation
Workflow
Turning the Power ON/OFF
Referring to “Turning the Power ON/OFF”
( P.2-3).
Setting a Media
Referring to “Setting a Media” ( P.2-4).
Preparing for the Heaters
Referring to “Preparing for the Heaters”
(P.2-16).
Test Printing
Referring to “Test Printing” ( P.2-16).
Head Cleaning
Referring to “Head Cleaning” ( P.2-17).
Setting of Media Correction
Referring to “Setting of Media Correction”
(P.2-18).
Correct the ink drop position for
bidirectional printing
Referring to “Correct the ink drop position for
bidirectional printing” ( P.2-19).
Printing Data
Referring to “Printing Data” ( P.2-20).
To Next Page
Loading...
