MIMAKI TS500P-3200 - Setting the Setting Lock Function; Setting a LANGUAGE; Initializing the Settings

3-26
Setting the Setting Lock function
You can freely specify a four digit password so that no one
other than an administrator can perform network and mail
settings.
Specifying the password for the
network and event mail functions
1
Press the
(MENU)
in Local.
2
Press to select “Machine Setup”
and press the key.
3
Press the
(>>)
twice.
4
Press to select “Network & Mail”
and press the key.
5
Press to select “Setting Lock”
and press the key.
6
Specify a freely chosen password (four
digits) and press the key.
• A notification that setting has started is briefly
displayed.
7
Press the key several times to
end the setting.
Releasing the password for the
network and event mail functions
1
Press the
(MENU)
in Local.
2
Press to select “Machine Setup”
and press the key.
3
Press the
(>>)
twice.
4
Press to select “Network & Mail”
and press the key.
5
Press to select “Setting Lock”
and press the key.
6
Enter a four-digit password and press the
key.
• If releasing is a successThe screen is displayed
a message “Release Success”.
• If releasing is a failureThe screen is displayed a
message “Release failure”.
7
Press the key several times to
end the setting.
Setting a LANGUAGE
You can change the displayed language.
1
Press the
(MENU)
in Local.
2
Press to select “Machine Setup”
and press the key.
3
Press the
(<<)
.
4
Press to select “Language” and
press the key.
5
Press to select language and
press the key.
• Set Value ：日本語 / English / Deutsch / Français
/ Español / Italiano / Português
6
Press the key several times to
end the setting.
Initializing the Settings
You can return the setting of “SETUP”, “Maintenance” and
“Machine Setup” to the status before shipment.
1
Press the
(MENU)
in Local.
2
Press to select “Machine Setup”
and press the key.
3
Press the
(<<)
.
4
Press to select “Reset” and
press the key.
5
Press the key.
• The already configured settings are initialized.
6
Press the key several times to
end the setting.
• If you forget the password, you can press the
“[FUNC2] ()” key displayed in the screen of Step
7 to display the password forced release screen.
Be careful as although you can press the [ENTER]
key to forcibly release the password, items set for
the network and event mail also return to their
initial values, making it necessary to re-specify
them.