4-23
4
2
Chapter 4 Maintenance
6
Close the lower part of the right side front
cover and press the key.
• After its initial operation, the machine returns to
Local.
Replacing the Mist Fan Filter (H fan
filter)
Replace it once a month.
1
Press the key,and then press the
(MAINT)
in LOCAL.
• The Maintenance menu appears.
2
Press to select “CARIGE OUT”,
and press the key twice.
• The carriage moves onto the platen.
3
Open the lower part of the right side front
cover.
(1) Remove the screws of the lower part of the
right side front cover (for two positions).
(2) Hold the upper of the lower part of the right
side front cover and pull it to the front.
• Open the lower part of the right side front cover
with the supplied screwdriver.
4
Remove the H fan filter cover at the right
side of the carriage.
• Remove the screw on the H fan filter cover before
removing the cover.
5
Remove the used H fan filter cover.
6
Mount a new H fan filter (SPC-0766).
• Align the hole in the H fan filter with the screw
hole.
7
Return the H fan filter cover to the original
status.
8
Close the lower part of the right side front
cover, and press the key.
Screw
Lower part of the right
side front cover
• Ink at printing adheres to the H fan filter ASSY.
When replacing the filter, it is recommended to
perform the work with a sheet of paper placed.
To Next Page
Loading...
