Chapter 1 Before Use
1-2
About installing this
machine
Where to Install This Machine
Secure a suitable installation space before assembling
this machine.
The place of installation must have enough space for not
only this machine itself, but also for the printing operation.
Working Environmental Temperature
Use this machine in an environment of 20 to 30°C to
ensure reliable printing.
The heater temperature may not reach the set value,
depending on the ambient temperature.
About fixing machine
The leg of this machine has the level foot to fix the
machine.
Before turning the power ON, make sure that the printer
body is fixed with the leveling feet. The printer body may
start moving during operation if it is not fixed with the
leveling feet.
Moving This Machine
Model Width Depth Height
Gross
weight
TS500P-
3200
5620mm 1800mm
*1
*1. When the tension bar is flat
1820mm 1500kg
External ink
supply unit
950mm 510mm 730mm 30kg
• The external heater is not attached to this
machine. It is necessary to prepare it separately.
• Install the external heater in the proper place
considering the usage environment and the
specifications of the external heater.
500 mm or more
654
4m
m
or
m
ore
3
7
8
5
m
m
o
r
m
o
r
e
500 mm or more
1
0
0
0
m
m
o
r
m
o
r
e
1
0
0
0
m
m
o
r
m
o
r
e
• Put the supplied iron base plate (black) between
each leveling foot and the floor. To hold the weight
of the printer, using plate is recommended.
• When the machine is moved to any place other
than on the same step-free floor, contact your
distributor or our service office.
If you move it by yourself, failure or damage may
occur.
Be sure to request your distributor or our service
office to move this machine.
To Next Page
Loading...
