4-10
Chapter 4 Maintenance
Washing the Ink Discharge Passage
Wash the ink discharge passage on a regular basis (once
every 2 - 3 months) to prevent ink coagulation from
clogging the passage.
1
Press the key,and then press the
(MAINT)
in LOCAL.
• The Maintenance menu appears.
2
Press to select “Disway Wash”,
and press the key.
• The carriage moves onto the platen.
• Dry suction operation is performed repeatedly
until the washing work is completed.
3
Open the lower part of the right side front
cover.
(1) Remove the screws of the lower part of the
right side front cover (for two positions).
(2) Hold the upper of the lower part of the right
side front cover and pull it to the front.
• Open the lower part of the right side front cover
with the supplied screwdriver.
4
Suction the cleaning solution into a
syringe and squirt about three syringes
worth of solution into each cap.
5
Close the lower part of the right side front
cover and press the key.
• After running a dry suction for a certain period of
time?the screen returns to step1.
Screw
Lower part of the right
side front cover
To Next Page
Loading...
