MIMAKI TS500P-3200 - Nozzle Recovery Function

4-15
4
2
Chapter 4 Maintenance
8
Press to set the resting time and
press the key.
• When the resting time has passed, the machine
absorbs the cleaning solution filled in the cap, and
performs cleaning. Then the machine returns to
the display in step 1.
Nozzle Recovery Function
Nozzle Recovery: When nozzles missing can not be
improved at specific points, other good nozzles can be
used as alternatives for printing.
Print the nozzle pattern
Used to print a pattern and to check and/or register
clogged nozzles.
1
Press the
(MENU)
in Local.
2
Press to select “Maintenance”,
and press the key.
• Maintenance menu appears.
3
Press to select “Nozzle
Recovery”, and press the key.
4
Press the key.
5
Press to select desired head(s)
(Head Line 1 to 3), and press the
key.
6
Press the key.
• Printing of the nozzle pattern will start.
• Select “ENTRY” then “Move to select of the
Nozzle line (Step 5) without drawing a pattern”
7
Select the Nozzle line that needs Nozzle
Recovery by pressing , and press
key.
• When nozzle missing is not cleared even after this
washing is carried out several times, contact the
distributor in your region or our service office.
1
10
21
30
41
50
61
70
81
90
101
110
121
130
141
150
161
170
181
190
201
210
221
230
241
250
261
270
281
290
301
310
1
10
21
30
41
50
61
70
81
90
101
110
121
130
141
150
161
170
181
190
201
210
221
230
241
250
261
270
281
290
301
310
1
10
21
30
41
50
61
70
81
90
101
110
121
130
141
150
161
170
181
190
201
210
221
230
241
250
261
270
281
290
301
310
1
10
21
30
41
50
61
70
81
90
101
110
121
130
141
150
161
170
181
190
201
210
221
230
241
250
261
270
281
290
301
310
Overhead view
L1-1AB
• Set a media of more than 210mm put horizontally.
If a media with narrow width is set, printing will
only be conducted to midway.
Nozzle pattern of Head 1 and 2
L1-1CD L1-2AB L1-2CD
Line 1Line 2Line 3
SELECT NOZZLE
L1- 1 AB
>
> L1- 1 CD
>
L1- 2 AB
>
L1- 2 CD
>><<
>
＊＊＊＊
Head Line
(L1 to L3)
Nozzle line
Head No. (1 to 4)