This chapter
describes the operation procedures for using the machine more conveniently and each
setting procedure.
About Setup menu .........................................3-2
Setup menu table ......................................... 3-3
Register the optimal print conditions to match
the use .........................................................3-5
Setting of Media Correction.......................... 3-6
If the Positions of Dots Shift... ...................... 3-7
Setting the Heater ........................................ 3-8
Setting of Logical Seek ................................ 3-8
Setting of Overprint ...................................... 3-9
Setting of Drying Time.................................. 3-9
Setting of Left and Right Margins................ 3-9
Setting of Refresh ........................................ 3-9
Setting of Refresh Left ............................... 3-10
Setting of Vacuum Fan............................... 3-10
Setting of Feed Speed ............................... 3-10
Setting of MAPS4....................................... 3-11
Setting of Auto Nozzle Maint...................... 3-12
Setting Interval wiping ................................ 3-15
Setting Head Gap....................................... 3-15
About Machine Setup menu.........................3-16
Machine Setup menu table ........................ 3-17
Setting a AUTO Power-off.......................... 3-18
Setting Feeding unit ................................... 3-18
Setting Take-up unit ................................... 3-19
Setting the Display of Media Remain..........3-19
Setting Time................................................3-19
Setting Unit (Temperature/ Length) ............3-19
Setting a Key Buzzer ..................................3-20
Selecting the head line to use.....................3-20
Setting the Media detect/ thickness............3-20
Setting a Drying Feed.................................3-20
Setting the Confirm. Feed...........................3-21
Setting the amount of blank space between
printed lines ................................................3-21
Setting the feed mode of the space of no data
to be printed................................................3-21
Set the network...........................................3-22
Setting event mail function..........................3-22
Setting the Setting Lock function ................3-26
Setting a LANGUAGE.................................3-26
Initializing the Settings................................3-26
About Information menu...............................3-27
Information menu table...............................3-27
Displaying the Information ..........................3-28
Displaying the Information of this machine.3-28
Chapter 3
Extended Functions
To Next Page
Loading...
