MIMAKI TS500P-3200 - Page 87

4-13
4
2
Chapter 4 Maintenance
5
Shift the flushing unit to the left.
(1) Remove the clasp.
(2) Hold The Handle And Shift The Flushing
Unit.
6
Wipe ink sticking to the side of the head off
with a clean stick.
• Never rub the nozzles.
7
Press the key after the cleaning.
8
Return the flushing unit to the original
position.
(1) Hold The Handle And Shift The Flushing
Unit.
(2) Fasten the clasp.
9
Close the lower part of the left side front
cover then press the key.
• After its initial operation, the machine returns to
Local.
Handle
clasp
The nozzle part
(Never touch it.)
Clean the side surface of
the head (shown in deep
gray) with a clean stick.
Clean with a clean stick or
a waste cloth.
Handle
clasp