4-21
4
2
Chapter 4 Maintenance
5
Close the waste ink tank cover.
• When the machine recognizes the new waste ink
tank, the warning message is released.
Discarding the waste ink on the left
side of machine
In the waste ink tank on the left side of the machine, the
ink and cleaning solution discharged at the flushing will be
accumulated.
When discarding the waste ink tank, please perform the
following tasks.
1
Remove the waste ink tank.
• Pull out the tube inserted into the waste ink tank,
and take out the waste ink tank.
2
Move waste ink to a polyethylene tank.
• Move waste ink pooled in the waste ink tank to
another polyethylene tank.
3
Return the empty waste ink tank to the
original position.
• Reinsert the tube pulled out.
• Discard the waste ink in the waste ink tank every
day. If left for a long time, the ink in the waste ink
tank may be cured or overflow.
• When disposing of the waste ink, be sure to wear
attached goggles and gloves to perform the work.
Otherwise, you may get ink in your eyes.
• If you get the ink on your skin or in your eyes,
wash it away with plenty of water immediately.
• When pulling out the tube, ink may drop from the
tip of the tube. Wipe the tube with waste cloth and
cover the tip before starting work.
• Request the treatment of waste ink you moved to
a polyethylene tank for an industrial waste
disposal contractor.
• A part of the ingredients (photo polymerization
initiator) has toxicity against aquatic organisms.
Please prevent leakage flow to natural water
systems (river, etc.) and domestic sewages (toilet,
road, etc.)
• Store the plastic container containing the waste
ink out of the sun. Otherwise, the waste ink may
cure.
To Next Page
Loading...
