ii
Starting the drawing operation................................... 2-9
Interruption of drawing............................................. 2-10
Checking drawing data that is being received or
has been received ................................................... 2-10
When [! WORK High] is displayed........................... 2-11
If you open the cover during drawing ...................... 2-11
Turning the power OFF......................................... 2-12
CHAPTER 3 Useful Function
Changing origin....................................................... 3-2
Changing origin with JOG keys ................................. 3-2
Changing origin with FUNCTION menu .................... 3-3
Setting the Head Height.......................................... 3-4
Setting the media thickness....................................... 3-4
Setting the head gap ................................................. 3-5
Setting the table height.............................................. 3-6
Gap check ................................................................. 3-7
Perform setting to reduce stripes between passes . 3-8
Other useful functions ........................................... 3-10
Data clear ................................................................ 3-10
Displaying information of this machine .................... 3-10
Proceed with drawing that you suspended.............. 3-11
Alternative nozzles for printing,
when nozzles missing can not be improved...................... 3-12
Checking ink landing displacement ......................... 3-14
Various settings .................................................... 3-15
Setting the print method .......................................... 3-15
Setting the mode of the LED UV ............................. 3-16
Increasing cumulative UV irradiation
when the number of passes is low .......................... 3-17
Setting of priority...................................................... 3-18
Setting the mode of the fan mode ........................... 3-19
Setting the work change .......................................... 3-20
Setting the ink weight .............................................. 3-21
Changing language display on the screen .............. 3-22
Output the setting list............................................... 3-23
Displaying machine information............................... 3-24
Other useful settings................................................ 3-26
Initializing settings ................................................... 3-27
Setting time.............................................................. 3-28
Setting mm/ inch...................................................... 3-29
To Next Page
Loading...
Need help?
General