MIMAKI UJF-3042FX User Manual

3-5
Setting the Head Height
3
Useful Function
Setting the head gap
If the head gap is changed, Table Height is also changed.
1
Press the key in the local mode.
2
Select the [HEAD HEIGHT] by pressing the or
key, and press the key.
3
Select the [HEAD GAP] by pressing the or
keys, and press the key.
4
Set the head gap by pressing the or
keys, and press the key.
• Set value: 1.5mm to 5.0mm
5
Press the key several times to end the setting.
<LOCAL>
FUNCTION
FUNCT I ON
WOR K S E T < E N T >
ENTER
HEAD HE I GHT
MEDIA THICKNESS<ent>
ENTER
HEAD HE I GHT
HEAD GAP : 1 . 5mm
ENTER
END

MIMAKI UJF-3042FX Specifications

General

Brand	MIMAKI
Model	UJF-3042FX
Category	Printer
Language	English