MIMAKI UJF-3042FX - Refilling antifreeze mixed water

Setting the media
2-5
2
Basic Operations
Set the media in another method
You can move the Y bar to the rear so that you may set the media easier.
1
Press the key in the local mode.
2
Press the key.
• The table is lowered.
3
To check the height, press the key.
• The table height can be checked after the table lifts to the
specified height, the obstacle sensor works, and the Y-bar
moves to the front.
4
Press the key.
• The table is lifted to the specified height.
<LOCAL>
FUNCTION
FUNCT I ON
WOR K S E T < E N T >
ENTER
WOR K S E T
COMP LE T ED : e n t
FUNCTION
WOR K S E T
COMP LE T ED : e n t
ENTER