4-11
600ml Ink cartridge
4
Maintenance
Registering the cartridge weight
After filling ink into the 600ml cartridge, register the cartridge weight.
1
After filling ink, press the key several times.
2
Press the key.
• An entry screen of the weight is displayed.
3
Remove the target cartridge, and weigh it on the scale.
4
Set the 600ml cartridge, enter the weight by
pressing the or key, and press the
key.
5
Press the key again.
• If other 600ml cartridges are found, the entry screen is
displayed. Repeat the Step 2 to 5.
• When all weights of the 600ml cartridges are entered, this
machine returns to the local mode to enable drawing or
cleaning.
• Press the key to cancel the weight entry, but a screen
shown on the right appears in the local mode, and the
canceled cartridge is invalid until the weight is entered.
• If the weight entry is canceled, remove and reinsert the
cartridge to display the weight entry screen again, and enter the weight.
END
To Next Page
Loading...
