To Next Page

To Previous Page

xviii

How to Read This Operation Manual

This manual provides the explanation about the displayed characters and used keys on the “Display Panel” in

addition to the operation procedures.

Proceed operations confirming them while using.

This explains the

outline of functions.

These are what we want you

to know in advance.

These are the number of

operation procedures.

This shows the

display panel.

Page number

enclose shows the

buttons in a sentence.

Default Chapter2
- Table of Contents2
- Caution6
- Foreword8
  - On this Operation Manual8
- For Safe Operation9
  - Symbols9
    - Precautions for Use13
    - Precautions for Installation15
- Position of the Warning Label16
- How to Read this Operation Manual18
CHAPTER 1 Before Use20
Installing the Machine20
- Where to Install the Machine20
- Moving this Machine21
Configuration and Function22
- Front22
- Rear22
- Operation Panel23
- Carriage24
- Emergency Switch24
Connecting the Cables25
- Connecting the USB2.0 Interface Cable25
- Connecting the Power Cable25
Setting of Ink Cartridge26
- Kinds of Ink that Can be Used26
About Media28
- The Sizes of Media that Can be Used28
- Precautions in Handling the Media28
Menu Mode29
CHAPTER 2 Basic Operations32
Operation Flow32
Turning the Power on33
Setting the Media34
- Set the Media in Another Method35
Test Drawing36
Execution of Head Cleaning38
Drawing an Image from Source Data39
- Starting the Drawing Operation39
- Interruption of Drawing40
- Checking Drawing Data that Is Being Received or Has Been Received40
- When [! WORK High] Is Displayed41
- If You Open the Cover During Drawing41
Turning the Power off42
CHAPTER 3 Useful Function44
Changing Origin44
- Changing Origin with JOG Keys44
- Changing Origin with FUNCTION Menu45
Setting the Head Height46
- Setting the Media Thickness46
- Setting the Head Gap47
- Setting the Table Height48
- Gap Check49
- Perform Setting to Reduce Stripes between Passes50
Perform Setting to Reduce Stripes Be- Tween Passes50
Other Useful Functions52
- Data Clear52
- Displaying Information of this Machine52
- Proceed with Drawing that You Suspended53
- Alternative Nozzles for Printing, When Nozzles Missing Can Not be Improved54
- Alternative Nozzles for Printing, When Nozzles Miss- Ing Can Not be Improved54
- Checking Ink Landing Displacement56
Various Settings57
- Setting the Print Method57
- Setting the Mode of the LED UV58
- Increasing Cumulative UV Irradiation When the Number of Passes Is Low59
- Setting of Priority60
- Setting the Mode of the Fan Mode61
- Setting the Work Change62
- Setting the Ink Weight63
- Changing Language Display on the Screen64
- Output the Setting List65
- Displaying Machine Information66
- Other Useful Settings68
- Initializing Settings69
- Setting Time70
- Setting MM/ Inch71
- Setting Weight of the Empty Cartridge72
- Setting Key Buzzer73
- Setting Radiator Pump74
- Setting the Flushing Level before Printing75
CHAPTER 4 Maintenance78
Routine Maintenance78
- When this Machine Is Left Unused for a Long Time78
- Precautions in Cleaning78
- Cleaning Exterior Surfaces79
- Cleaning the Table79
Ink Cartridge80
- Replacing with a New Ink Cartridge80
- Setting the Ink Set81
- Press the Enter Key82
- Ink Cartridge Trouble84
- Shaking the White Ink Cartridge85
600Ml Ink Cartridge86
- Registering the Case Weight86
- Registering the Cartridge Weight87
- Registering the Cartridge Weight (after LVL LOW / LVL END)88
Avoiding Dripping of Ink Droplet at Printing89
When the Waste Ink Is Full91
- Disposing of the Ink in the Waste Ink Tank91
- Disposing of the Waste Ink in the Wiper Bottle93
Replacing the Filter95
Washing the Nozzle97
Wash the Ink Discharge Passage99
When the Machine Is Not Used for a Long Time (CUSTODY WASH)101
Washing the Head103
Perform Ink Filling105
Setting Nozzle Face Cleaning Time106
Regular Maintenance for White Ink107
Cleaning of Wiper109
Refilling Antifreeze Mixed Water111
Before Taking a Phenomenon as a Trouble114
- The Machine Cannot be Energized114
- The Machine Cannot Perform Printing114
- If Image Quality Declines115
- Resolving Nozzle Clogging115
CHAPTER 5 In Case of Trouble114
Troubles for Which Error Messages Are Given on the LCD116
- Warning Message116
- Error Message118
CHAPTER 6 Appendix124
Specifications124
- Basic Unit Specifications124
- Specifications for Ink125
Function Flowchart127

Brand	MIMAKI
Model	UJF-3042FX
Category	Printer
Language	English

MIMAKI UJF-3042FX User Manual

Table of Contents

Questions and Answers:

MIMAKI UJF-3042FX Specifications

Related product manuals