MIMAKI UJF-3042FX User Manual

4-4
Ink cartridge
Replacing with a new ink cartridge
Replacing of ink cartridges is required in the following cases.
1
Press the key in the local mode.
2
Select the [MAINTENANCE] by pressing the or
key, and press the key.
3
Select the [STATION] by pressing the or
key, and press the key.
4
Select the [EXCH CARTRIDGE] by pressing the
or key, and press the key.
• Y-bar moves to the front.
5
Remove an ink cartridge to be replaced.
6
Set a new ink cartridge
• As shown in the drawing, set an ink cartridge turning up a side
containing the IC chip.
7
After replacing, press the key.
• Y-bar returns to the back.
8
Press the key to finish.
Display Outline
The ink in the ink cartridge is low.
?Drawing can be continued, but the ink may end during the drawing. Early
replacement is recommended.
?The display shown in the left indicates that magenta ink is low.
The ink in the ink cartridge ended.
?Unable to continue drawing. Replace with a new one immediately.
?The display shown in the left indicates that magenta ink ended.
<LOCAL>
INK NEND M_____
<LOCAL>
INK END M_____
<LOCAL>
FUNCTION
FUNCT I ON
MA I NT ENANCE < ENT >
ENTER
MA I NT ENANCE
STAT I ON <en t >
ENTER
STAT I ON
MENT : EXCH CARTR I DGE
ENTER
IC chip
STAT I ON
COMP LE T ED : e n t
ENTER
END

MIMAKI UJF-3042FX Specifications

General

Brand	MIMAKI
Model	UJF-3042FX
Category	Printer
Language	English