MIMAKI UJF-3042FX - Setting the Table Height

3-6
Setting the table height
If the table height is changed, Media Thickness is also changed.
1
Press the key in the local mode.
2
Select the [HEAD HEIGHT] by pressing the or
key, and press the key.
3
Select the [TABLE HEIGHT] by pressing the or
keys, and press the key.
4
Set the table height by pressing the or
keys, and press the key.
• Set value: 0.0mm to 50.0mm
5
Press the key several times to end the setting.
• Adjust [MEDIA THICKNESS] or [TABLE HEIGHT] based on the head gap value so that [HEAD GAP] +
[MEDIA THICKNESS] + [TABLE HEIGHT] = 51.5mm.
If adjustment cannot be performed, an operation error is displayed.
<LOCAL>
FUNCTION
FUNCT I ON
WOR K S E T < E N T >
ENTER
HEAD HE I GHT
MEDIA THICKNESS<ent>
ENTER
HEAD HE I GHT
TBL HE I GHT : 49 . 0mm
ENTER
END