4-13
4
Maintenance
Avoiding dripping of ink droplet at printing
Ink droplets from the mist at drawing may arise on the bottom of the carriage. As the ink droplets may drip and
stain the media or cause blur or dot missing, clean the bottom of the carriage periodically.
1
Turn the power on.
• After initializing, <LOCAL> is displayed.
2
Press the key in the local mode.
3
Select the [MAINTENANCE] by pressing the or
key, and press the key.
4
Select the [STATION] by pressing the or
key, and press the key.
5
Select the [HEAD MENT] by pressing the or
key, and press the key.
• The carriage automatically moves to the center of the front end.
6
Open the table front cover.
Tools
• UJ Cleaning swab (SPC-0386) • Gloves • Goggles
• F-200 / LF-200 Washing Liquid (SPC-0568)