MIMAKI UJF-3042FX - Setting the Head Height; Setting the Media Thickness

3-4
Setting the Head Height
Media thickness, Head gap, and Table height can be changed.
Setting the media thickness
If the media thickness is changed, Table Height is also changed.
1
Press the key in the local mode.
2
Select the [HEAD HEIGHT] by pressing the or
key, and press the key.
3
Select the [MEDIA THICKNESS] by pressing the
or keys, and press the key.
4
Set the media thickness by pressing the or
keys, and press the key.
• Set value: 0.0mm to 50.0mm
5
Press the key several times to end the setting.
• Adjust [MEDIA THICKNESS] or [TABLE HEIGHT] based on the head gap value so that [HEAD GAP] +
[MEDIA THICKNESS] + [TABLE HEIGHT] = 51.5mm.
If adjustment cannot be performed, an operation error is displayed.
<LOCAL>
FUNCTION
FUNCT I ON
WOR K S E T < E N T >
ENTER
HEAD HE I GHT
MEDIA THICKNESS<ent>
ENTER
HEAD HE I GHT
TH I CKNESS : 1 . 0mm
ENTER
END