MIMAKI UJF-3042FX - Checking Ink Landing Displacement

Other useful functions
3-14
Checking ink landing displacement
You can check for ink landing displacement from causes such as the equipment table shaking.
(Supported from the firmware ver.3.80)
1
Press the key in the local mode.
2
Select the [MAINTENANCE] by pressing the or
key, and press the key.
3
Select the [DISPLACEMENT] by pressing the or
key, and press the key.
4
Print the pattern for evaluating ink landing on the whole
table.
• When plotting is completed, return to step 3.
• Ink landing displacement will result in a striped pattern.
Check that the table does not shake and that there is not a large head gap. If there is a large ink landing
displacement, request service to readjust the device.
<LOCAL>
FUNCTION
FUNCT I ON
MA I N T ENANCE < ENT >
ENTER
MA I N T ENANCE
D I SPLACEMENT <ENT>
ENTER
MA I N T ENANCE
PR I NT I NG