MIMAKI UJF-3042FX

To Next Page

To Previous Page

When the waste ink is full

4-18

Press the key.

Press the key to finish.

STAT I ON

COMP LE T ED : e n t

ENTER

END

Main Page

Default Chapter2
- Table of Contents2
- Caution6
- Foreword8
  - On this Operation Manual8
- For Safe Operation9
  - Symbols9
    - Precautions for Use13
    - Precautions for Installation15
- Position of the Warning Label16
- How to Read this Operation Manual18
CHAPTER 1 Before Use20
Installing the Machine20
- Where to Install the Machine20
- Moving this Machine21
Configuration and Function22
- Front22
- Rear22
- Operation Panel23
- Carriage24
- Emergency Switch24
Connecting the Cables25
- Connecting the USB2.0 Interface Cable25
- Connecting the Power Cable25
Setting of Ink Cartridge26
- Kinds of Ink that Can be Used26
About Media28
- The Sizes of Media that Can be Used28
- Precautions in Handling the Media28
Menu Mode29
CHAPTER 2 Basic Operations32
Operation Flow32
Turning the Power on33
Setting the Media34
- Set the Media in Another Method35
Test Drawing36
Execution of Head Cleaning38
Drawing an Image from Source Data39
- Starting the Drawing Operation39
- Interruption of Drawing40
- Checking Drawing Data that Is Being Received or Has Been Received40
- When [! WORK High] Is Displayed41
- If You Open the Cover During Drawing41
Turning the Power off42
CHAPTER 3 Useful Function44
Changing Origin44
- Changing Origin with JOG Keys44
- Changing Origin with FUNCTION Menu45
Setting the Head Height46
- Setting the Media Thickness46
- Setting the Head Gap47
- Setting the Table Height48
- Gap Check49
- Perform Setting to Reduce Stripes between Passes50
Perform Setting to Reduce Stripes Be- Tween Passes50
Other Useful Functions52
- Data Clear52
- Displaying Information of this Machine52
- Proceed with Drawing that You Suspended53
- Alternative Nozzles for Printing, When Nozzles Missing Can Not be Improved54
- Alternative Nozzles for Printing, When Nozzles Miss- Ing Can Not be Improved54
- Checking Ink Landing Displacement56
Various Settings57
- Setting the Print Method57
- Setting the Mode of the LED UV58
- Increasing Cumulative UV Irradiation When the Number of Passes Is Low59
- Setting of Priority60
- Setting the Mode of the Fan Mode61
- Setting the Work Change62
- Setting the Ink Weight63
- Changing Language Display on the Screen64
- Output the Setting List65
- Displaying Machine Information66
- Other Useful Settings68
- Initializing Settings69
- Setting Time70
- Setting MM/ Inch71
- Setting Weight of the Empty Cartridge72
- Setting Key Buzzer73
- Setting Radiator Pump74
- Setting the Flushing Level before Printing75
CHAPTER 4 Maintenance78
Routine Maintenance78
- When this Machine Is Left Unused for a Long Time78
- Precautions in Cleaning78
- Cleaning Exterior Surfaces79
- Cleaning the Table79
Ink Cartridge80
- Replacing with a New Ink Cartridge80
- Setting the Ink Set81
- Press the Enter Key82
- Ink Cartridge Trouble84
- Shaking the White Ink Cartridge85
600Ml Ink Cartridge86
- Registering the Case Weight86
- Registering the Cartridge Weight87
- Registering the Cartridge Weight (after LVL LOW / LVL END)88
Avoiding Dripping of Ink Droplet at Printing89
When the Waste Ink Is Full91
- Disposing of the Ink in the Waste Ink Tank91
- Disposing of the Waste Ink in the Wiper Bottle93
Replacing the Filter95
Washing the Nozzle97
Wash the Ink Discharge Passage99
When the Machine Is Not Used for a Long Time (CUSTODY WASH)101
Washing the Head103
Perform Ink Filling105
Setting Nozzle Face Cleaning Time106
Regular Maintenance for White Ink107
Cleaning of Wiper109
Refilling Antifreeze Mixed Water111
Before Taking a Phenomenon as a Trouble114
- The Machine Cannot be Energized114
- The Machine Cannot Perform Printing114
- If Image Quality Declines115
- Resolving Nozzle Clogging115
CHAPTER 5 In Case of Trouble114
Troubles for Which Error Messages Are Given on the LCD116
- Warning Message116
- Error Message118
CHAPTER 6 Appendix124
Specifications124
- Basic Unit Specifications124
- Specifications for Ink125
Function Flowchart127

MIMAKI UJF-3042FX - Page 94

Table of Contents

Related product manuals