5-4 Passport 12/Passport 8 Operator’s Manual
5.6 Editing Configurations
To edit an existing configuration:
1. Select [Edit Config. >>] in the [Manage Configuration] menu. The following menu appears.
2. The pop-up menu shows the existing monitor configurations. Selecting [Config. on USB drive >>] will show the
existing configurations on the USB drive. Select the desired configuration and then select the [Edit] button. The
following menu appears.
3. Select [Alarm Setup >>], [Screen Setup >>] or [Parameters >>] to enter the corresponding menu in which
settings can be changed. The changed alarm setup items will be marked in red.
4. You can select [Save] or [Save as] to save the changed configuration. Select [Save] to overwrite the original
configuration. Select [Save as] to save the changed configuration as another file with another name.
To Next Page
Loading...
