Passport 12/Passport 8 Operator’s Manual 24-1
24 Batteries
24.1 Overview
This monitor is designed to operate from rechargeable Lithium-ion battery power when AC power is not available. It is
recommended to always install fully charged batteries into the monitor to ensure normal monitoring in case of
accidental power failure. If the AC power is interrupted during patient monitoring, the monitor automatically runs
from the battery. The Passport 12 patient monitor is capable of storing up to two batteries. The Passport 8 patient
monitor is capable of storing one battery.
On-screen battery symbols indicate the battery status as follows:
Indicates full battery capacity.
Indicates that the battery works correctly. The solid portion represents the current charge level of the
battery in proportion to its maximum charge level.
Indicates that the battery has a low charge level and needs to be charged.
Indicates that the battery is almost depleted and needs to be charged immediately.
Indicates that no battery is installed.
The capacity of the battery is limited. When the battery is low, the technical alarm area displays [Low Battery], the
alarm lamp flashes, and monitor produces an alarm sound.
If the battery is depleted, the battery symbol on the screen flashes, the technical alarm area displays [Battery
Depleted], the alarm lamp flashes, and the monitor produces alarm sound. Connect the equipment to AC mains to
run the equipment and charge the battery. Otherwise the equipment will shut down.
To Next Page
Loading...
Need help?
General
