Mindray PM-9000 - Spo Setup Menu

SpO
2
Monitoring
12-17
 A blood pressure cuff is inflated on the same extremity as the one with a SpO
2
sensor attached;
 The patient has hypotension, severe vasoconstriction, severe anemia, or
hypothermia;
 There is arterial occlusion proximal to the sensor;
 The patient is in cardiac arrest or is in shock.
12.3.5 SpO
2
Setup Menu
Selecting the SPO
2
label in the parameter window opens the following menu.
Figure 12-7 MASIMO SpO
2
Setup Menu
You can perform the following settings in this menu.
 ALM
SpO
2
alarm on/off status
ON: When a SpO
2
alarm occurs, the monitor gives alarm
indications and stores the alarm;
OFF: When a SpO
2
alarm occurs, the monitor neither gives
alarm indications nor stores the alarm;
When OFF is selected, the
icon is displayed on the right
of the SPO
2
label.
 ALM LEV
Alarm level
Options: HIGH, MED and LOW.