ECG/RESP Monitoring
11-47
11.8 Maintenance and Cleaning
WARNING
z Before cleaning the ECG cable, be sure to disconnect the monitor from
the ECG cable, or shut down the system and disconnect all power cords
from the outlet.
z If the ECG cable is damaged or aged, replace with a new one.
îš„ Cleaning
The exterior surfaces of the ECG cable may be cleaned with a soft cloth, dampened
with the alcohol, and then be air-dried or dried with a clean dry cloth.
îš„ Disinfection
Disinfection may cause damage to the equipment. We recommend the disinfection
be contained in the hospital’s servicing schedule only when necessary. The
equipment should be cleaned prior to disinfection.
îš„ Sterilization
Sterilization may cause damage to the equipment. We recommend the sterilization
be contained in the hospital’s servicing schedule only when necessary. The
equipment should be cleaned prior to sterilization.
To Next Page
Loading...
Need help?
General
