TEMP Monitoring
14-5
TD ALM HI
Determines the upper limit of the temperature difference
between channel 1 and channel 2.
TEMP UNIT
Options: ℃ and ℉
DEFAULT >>
You can select this option to access the NIBP DEFAULT
CONFIG menu, in which you may select FACTORY
DEFAULT CONFIG or USER DEFAULT CONFIG. After
finishing your selection and exiting the menu, the system
pops up a dialog box asking for your confirmation.
Temperature alarm limits:
Parameter Maxi. Upper Mini. Lower Step
T1 and T2 50 0 0.1
TD 50 0 0.1
To Next Page
Loading...
