CO Monitoring
16-7
NOTE
z You must perform the injection within 4 seconds after pressing the
START option.
z You are recommended to wait for 1 minute or longer, depending on the
patient’s clinical condition, before starting the next measurement.
You can perform a maximum of 6 measurements before editing. If extra
measurements are performed, the latest measurements will replace the earlier ones.
If a curve in the editing window is not selected for calculation (excluded from the
averaging calculation), the place of the curve will be taken by the new measurement
result.
CO Editing
Selecting EDIT >> from WINDOW FOR C.O. MEASUREMENT opens
WINDOW FOR C.O. EDIT.
Figure 16-4 Window for CO Editing
1. The curve for one of the six measurements and the corresponding CO value.
2. The average CO value.
3. The average CI value.
4. The function option in the window for CO editing.
1
2
3
4
To Next Page
Loading...
Need help?
General
