System Menu
4-6
BIRTH Patient date of birth: year-month-day;
HEIGHT Patient height (unit: cm or inch);
WEIGHT Patient weight (unit: kg or IB);
BLOOD
Patient blood type:
A, B, O, AB or N (N represents unknown)
NOTE
z If the PAT NO or NAME has not been input, “PATI. INFO. IMCMP” will be
displayed in the patient information area.
4. Select OK button, and the patient is admitted.
5. If the monitor is connected with the central monitoring system, you can
monitor the patient through the central monitoring system.
Setting Patient Information
To enter information in a field containing no mark, follow this procedure (take
DEPT. as an example):
1. Rotate the control knob and highlight the field after DEPT.
2. Press the control knob, and the cursor jumps to the soft keypad below.
3. Rotate the control knob and move the cursor to the desired letter, number or
space, and press the control knob to enter the character. Select DEL button to
delete the unwanted entered character.
4. Repeat step 3 until you finish the information entering.
5. Select OK on the soft keypad. The information setting finishes.
To enter information in a field containing the mark “
”, follow this procedure (take
SEX as an example):
1. Rotate the control knob and highlight the field after SEX.
2. Press the control knob. A pop-up menu opens.
3. Rotate the control knob and select the desired option.
To set a feild containing the mark “
”, follow this procedure (take BED NO as an
example):
1. Rotate the control knob and highlight the field after BED NO.
To Next Page
Loading...
Need help?
General
