4 Setup
Operator’s Manual 4 - 45
If the patient data are already stored in the hard disk, the system will pop-up prompts, follow
the steps below:
a. Click [OK].
b. Click [Wipe] or [Secure Wipe] and operate according to the screen prompts to clear
patient data.
If [Secure Wipe] is selected, the deleted patient data cannot be restored with restoration
tools. Perform this operation with caution.
c. Select [User-defined] again, and click [Confirm].
d. Input the password and click [Confirm] to finish the password setting.
• If you want to switch to Factory Default, perform steps above again. The password is the same
as that of the User Define.
• When you set password, multi-language and Chinese characters are not supported.
4.11.2 Anti-Virus
The system provides two pieces of anti-virus software: Windows Defender and McAfee. They can
effectively prevent the ultrasound system from being attacked by virus, spyware, or other malware.
• Windows Defender is already installed on the system.
• The McAfee software is an option. If the McAfee software is installed, the system displays
“McAfee is running”. If you want to buy McAfee, contact Mindray representatives.
• McAfee cannot be uninstalled after successful installation.
• After the option is installed, the system will be restarted. And after restart, the system installs
McAfee automatically, which needs about one hour.
• If McAfee is improperly installed due to power-off, shut-down, closing of cmd.exe, or any
other abnormal operation during the installation, please contact the Mindray service engineers.
4.12 System Information
Click [About] on the Setup menu to enter the system information screen.
• About
The “About” shows the information about the product type, manufacturer, configuration type,
ECN/TCN, version number, MAC address, etc.
You cannot edit the information, but only view them. The information varies depending on the
system configurations and version.
• Statistics
Log onto the system as Administrator, and click [Statistics] to enter the statistics screen, which
shows the total exam numbers of each probe, application and operator.
• Open Source
The “Open Source License” and “Open Source Info.” pages display the license and declaration
of open sources.