16 Patient Data Management
Operator’s Manual 16 - 9
If the input box is left blank, the feature will not be enabled.
Only the whole number ranging from 1 to 365 can be input.
2. Click [Modify].
16.5 iStorage
To use iStorage function, you need UltraAssist software in 2.0 version (with V1.0 network
protocol); consult Mindray service engineer for details.
Network storage is used to save image files and measurement reports to the remote PC server.
For network storage setting, see “4.8.2 iStorage Preset”.
1. Enter iStation, select one (or more than one) patient data or image in the local data source.
2. Click [Send Exam].
3. Select [iStorage] in the Send To dialog box, and select the PC server of the right side.
4. Select PC transfer format and check whether to send report.
5. Click [OK] to start sending.
16.6 Print
For printer connection, see “3.8 Connecting Peripheral Devices”.
For user-defined key for printing and video output settings, see “4.1 System Preset”.
16.6.1 Image Print
For DICOM image printing, refer to relevant chapters. Video printer is applied in image print
service.
Perform the following procedure:
1. Select the desired image in iStation or Review screen.
2. Click icon on the upper right side of the image, and select the printer in the popped up
dialog box.
3. Click [OK] to start printing.
Please refer to the accompanying manuals of the printers for more details.
16.6.2 Report Printing
Both reports and images can be printed on a graph/text printer. For detailed information about the
report printing, see Advanced Manual.
16.7 Back up Files using the DVD Drive
During the backup process, if a CD/DVD is forcibly taken out or you perform
other operations, the backup process will fail or the system may malfunction.
To Next Page
Loading...
Need help?
General
