Mindray Resona 7T User Manual

7 3D/4D
Operator’s Manual 7 - 41
7. Save the file.
7.17.2 Operation Controls
Axis rotation and shifting
Rotate <M>/<PW>/<C> knob to rotate the view along X/Y/Z-axis.
Rotate the knob to scroll the view.
Quick adjustment
After corresponding views are displayed, select the view and tap [Quick Adjust] to adjust the view.
If four-chamber view, 3VV-T view or stomach bubble view is selected, tap [Quick Adjust] to scroll
the view along Z-axis.
If current view is left ventricular outflow tract view (LVOT), tap [Quick Adjust] to move the view
along Y-axis.
If current view is LAV-DA view or right ventricular outflow tract view (RVOT), tap [Quick Adjust]
to move the view along X-axis.
Reset
[Reset All]: tap to undo all operations on A/B/C plane and go back to status in step 4.
[Reset Ori]: tap to undo all orientation adjustments on A/B/C plane and go back to status in step 4.
[Reset All/Current View]: tap to restore operations on all views or current view and go back to
status in step 4.
Parameter adjusting
Parameters under Smart Plane FH are similar to those under Static 3D mode.
7.18 Smart Face
NOTE:
Smart Face is only used for obtaining fetal face features, not for confirming a diagnosis.
This feature allows the system to recognize fetal face and remove the shading obstacle data
automatically, then display the face in a recommended viewing angle.
Perform the following procedure:
1. Acquire Static 3D image or frozen 4D single-frame image of fetal face.
2. Tap [Smart Face] to enter the function and the system adjust fetal face angle (fetal head facing
up) automatically and remove the shading obstacle data.
7.18.1 Parameter adjusting
Parameters under Smart Face are similar to those under Static 3D mode.
Tap to enter Setup screen.
MixRender/SubTint
NOTE:
This function is available only under “Surface” mode.

Mindray Resona 7T Specifications

General

Brand	Mindray
Model	Resona 7T
Category	Medical Equipment
Language	English