Mindray Resona 7T User Manual

2 - 10 Operator’s Manual
2 System Overview
No. Item Description
1. Monitor Used for displaying the images and parameters during
scanning.
2. Speaker Used for outputting the audio.
3. Touch Screen Screen-touching operator-system interface or control.
4. Control panel Key-pressing operator-system interface or control.
5. Ascending/descending
button
Used for ascending or descending the system electrically.
6. Control panel moving
control button
Used for locking or unlocking the move of the control panel.
7. Cable hook Used for hanging the probe cables.
8. Probe port Used for connecting transducers and the main unit.
9. Central brake : Used for securing the system by stepping down the left
pedal.
: Used for moving the system straight forward by stepping
down the right pedal.
10. Caster Used for moving the system.
11. Input panel Used for connecting ECG leads and USB drive, etc.
12. DVD Used for DVD reading and writing.
13. Monitor support arm Used for supporting and adjusting the LCD monitor angle.
14. The control panel
moving mechanism
Used for stretching or rotating the control panel.
NOTE:
Available only after the Moving Assembly of the Control
Panel is configured.
15. Ascending/descending
mechanism
Used for adjusting the height of the control panel, in
conjunction with the electrical system.
16. Handle of main unit Used for winding the cables up and moving the system.
17. I/O Panel Used for input and output signals.
18. Power supply assembly
for the system
Used for providing the power to the system.
19. Intra-cavity probe holder Used for placing the intra-cavity probe.
20. Transducer & gel holder Used for placing transducers and gel temporarily.

Mindray Resona 7T Specifications

General

Brand	Mindray
Model	Resona 7T
Category	Medical Equipment
Language	English