Troubleshooting Menus Repair Information
1 - 36 0070-10-0556-02 Spectrum
®
/Spectrum OR
™
Service Manual
1.25.13 Trends Troubleshooting
1.25.14 Printer/Recorder Troubleshooting
MESSAGE/PROBLEM REASON SOLUTION
No Trends displayed No Trend triggers set Go to the Monitor Setup
Menu and set NIBP Trend,
Trend Interval or Alarm
Trend as desired
Trend page is scrolled Use scroll button in Trend Menu
to scroll to top of Trend Menu
MESSAGE/PROBLEM REASON SOLUTION
Recorder Report Appears
Totally Blank
Thermal paper may be installed
incorrectly (up-side down)
Remove paper and re-install with
paper feeding off of the spool
from the bottom
Local Printer Door Open The printer door is not closed Close the printer door
Local Printer Out Of Paper Printer out of paper Replace with a new roll of paper
Printer Busy Printer received multiple print
requests at one time
Wait until the printer is not busy
Local Printer Unable To
Print
The system has detected an
unrecoverable printer failure
Power cycle unit. If message
reappears, contact Customer
Support.
Check Laser Printer Laser printer is busy,
disconnected, out of paper or has
a fault condition
Check laser printer
No print on Alarm Alarm printing not active Go to Print Setup Menu and
set Print on Alarm to On
Trends not printing Print Trend not pressed Press PRINT TREND when trend
window is open
No Trends displayed Use scroll feature to scroll to the
top of the trend then press
PRINT TREND
No paper Check / Replace paper
To Next Page
Loading...
