Mindray TEX20 Operator's Manual

4 Setup
Operator’s Manual 4 - 11
Select the user to be deleted in the User List. Tap [Delete] to delete the selected user.
Editing Privilege
Turn on the access control function and log in to the system as Administrator before you edit
privileges.
1. Select a user, tap [Edit Privilege] to enter the “Edit user privilege” dialog box, and select or
deselect the check box from the privilege list.
2. Tap [OK] to confirm the editing and exit the dialog box. The edited privileges will appear in
the User List.
Modify Passwords
The system administrator can modify all user passwords. The administrator password is empty by
factory default. You can set this password.
An operator can only modify his/her own password.
1. Select the user name to be modified in User List. Tap [Change Password] to open the dialog
box.
2. Enter the new password and confirm the password, and then tap [OK].
Configure Password Policy
Turn on the access control function and log in to the system as Administrator before you configure
the password policy.
Tap [Password Policy Config]:
Item Description Remark
Lockout
Threshold
Set the maximum time that a user can input the
wrong password. If you exceed the maximum
times, your account will be locked.
For example, assume that the
“Lockout Threshold” is set
to 5, the “Reset Account
Lockout Threshold after” is
set to 60, and the “Lockout
Duration” is set to 60. That
is, a user inputs the wrong
password for 5 times within
60 minutes, the account is
locked, and the user can log
in to the system only after 60
minutes. Other users with
unlocked accounts can still
log in to the system
normally.
Reset Account
Lockout
Threshold after
Set the duration allowed for a user to
continuously input the wrong password.
Lockout Duration Set the duration after an account is locked.
Reset all lockout Reset all locked accounts. /

Mindray TEX20 Specifications

General

Brand	Mindray
Model	TEX20
Category	Diagnostic Equipment
Language	English