Minebea Intec MiNexx-link-E PR 5215/01 - Page 110

9. Fieldbus interface | 9.2 - Scale protocol | 110
Field Size Function
Now the test value can be read out by reading
the gross weight.
ResTare 1 bit Tare is reset.
SetTare 1 bit The weighing point is tared.
SetZero 1 bit The weighing point is set to zero.
Read window (MISO)
Byte Field Description
0 Read data (MSB)
1 Read data
2 Read data
3 Read data (LSB)
Contains the data to be
written, e.g. gross value.
4 Read_Value_Selected Read_Value_Select (func
tion) from the write win
dow is mirrored if the data
in "Read data" is available.
5 Write
Active
Power
Fail
Out
put 3
Out
put 2
Out
put 1
Limit
3
Limit
2
Limit
1
6 Cmd
Busy
Cmd
Error
Input
3
Input
2
Input
1
Tare
Ac
tive
Cal
Chan
ged
Test
Ac
tive
7 OutOf
Range
Stand
still
In
side
ZSR
Cen
ter
Zero
Be
low
Zero
Over
load
Above
Max
ADC
Error
In direct access, status bits
are independent of the
write or read request.
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0