Minebea Intec MiNexx-link-E PR 5215/01 - Calibrating Internal Weighing Point; General Instructions

6. Operating | 6.14 - Calibrating internal weighing point | 98
[Zerotrack time]
Time interval for automatic zerotrack.
Input: 0.1 to 25.0s
[Overload]
Weighing range above the maximum capacity (Max) without error mes
sage.
Input: 0 to 999999d; 9d (default)
2. Save the settings.
6.14 Calibrating internal weighing point
6.14.1 General instructions
The transmitters of the PR 5215 series do not have legal-for-trade approval.
The legal-for-trade application of PR 5215 with other devices has to be
verified.
The adjustment data are protected by the CAL switch (see ChapterCAL
switch).
Note: The [Modify] menu item is only used for small changes
(e.g. changing the dead load/preload, changing the mV/V values for dead
load/preload and/or Max, changing the scale interval). Otherwise select
the [New] menu item.