5. Getting started | 5.7 - Overwrite protection | 67
5.7 Overwrite protection
5.7.1 CAL switch
Overwrite protection can be activated via a CAL switch to protect the
metrological parameters against unauthorized access.
The CAL switch is located on the front of the device.
Write protection not activated Write protection activated
opened
closed
Changes to the metrological parame
ters can be carried out.
Blocks changes to the following
metrological parameters:
– Weighing ranges/parameters
– Calibrate/adjust
The CAL switch can be protected by the customer with a suitable sticker.
To Next Page
Loading...