Minebea Intec MiNexx-link-E PR 5215/01 - WEB Menu; Weighing Points

6. Operating | 6.3 - WEB menu | 78
6.3 WEB menu
6.3.1 Weighing points
ADC parameters ·
– Measure time
Selection: 10ms, 20ms, 40ms, 80ms, 160ms, 320ms, 640ms
– Digital filter
Selection: none, Bessel, Aperiodic, Butterworth, Tschebyscheff
– Cut-off frequency
Input: 0.00…40.00 Hz
– Standstill time
Input: 0.00…2s
– Standstill range
Input: 0.01…10.00d
– Tare condition
Selection: Tare without standstill, Tare after standstill
– Tare timeout
Input: 0.00…25.00s
– Zeroset range
Input: 0.00…10000.00d
– Zerotrack
Selection: Yes, No
– Zerotrack indic. range
Input: 0.25…10000.00d
– Zerotrack step
Input: 0.00…40.00d
– Zerotrack time
Input: 0.1…25.0s
– Overload
Input: 0…9999999d