Minebea Intec MiNexx-link-E PR 5215/01 - Metrology and Calibration

6. Operating | 6.13 - Metrology parameters | 95
6.13 Metrology parameters
: [ADC parameters]
1.
Select the individual parameters and change them if necessary.
[Measuring time]
Measuring time: The duration of a measurement can be selected.
Selection: 10ms, 20ms, 40ms, 80ms, 160ms, 320ms, 640ms
[Digital filter]
Note: After changing the filter parameters, a new adjustment may be
necessary to ensure maximum accuracy.
The following includes examples of interference signals for the different
filter types:
Bessel filter Aperiodic filter