3. Device description | 3.1 - Transmitter types | 22
3.1.10 PR 5215/11
This type includes
– 3 digital inputs and outputs
– a port for the analog weighing electronics (ADC)
– a supply voltage connection
– a RS-485 interface
– a network port
– a ProfiBus-DP interface
– an analog output
Note: The Profibus-DP interface and the analog output are located on a
so-called CombiCard.
The ProfiBus-DP connection is established by D-Sub 9-pin plug connector (fe
male) on the top of the device.
See also ChapterOverview of connections.
To Next Page
Loading...