Minebea Intec MiNexx-link-E PR 5215/01 - Page 82

6. Operating | 6.3 - WEB menu | 82
– EtherCAT
– IP address
Input: Valid IP address
– Subnet mask
Input: Valid IP address
– Analog output
– Mode
Selection: None, Transparent, Gross, Net, Select (Gross/net value
output on the display via D11)
– Range
Selection: 0…20 mA, 4…20 mA
– Output on wgt. err.
Selection: Hold, 0 mA, 4 mA, 20 mA
– On <0
Selection: Linear, 0 mA, 4 mA, 20 mA
– On >Max
Selection: Linear, 0 mA, 4 mA, 20 mA
– Analog value
Only by selection mode "Transparent"
Input: fixed analog value
– Weight value for 0/4 mA
Input: Weight value
– Weight value for 20 mA
Input: Weight value
– Adjustment for 4 mA
Input: Weight value
– Adjustment for 20 mA
Input: Weight value